BBKGR - H956 AMINE HARDENER
- MSDS: BBKGR
- Manufacturer: CIBA GEIGY CORP PLASTICS AND ADDITIVES
- Product Name: H956 AMINE HARDENER
- National Stock Number: 8040-01-126-6271
Product Identification
Product ID:H956 AMINE HARDENER
MSDS Date:12/10/1988
FSC:8040
NIIN:01-126-6271
MSDS Number: BBKGR
Responsible Party
HAWTHORNE, NY 10532-2119
US
Emergency Phone: 800-888-8372
Info Phone: 914-347-4700
Preparer: PETER HENIGE
Cage: EO487
Contractor
Telephone: 800-888-8372
Cage: 07566
Ingredients
TRIETHYLENETETRAMINE
CAS: 112-24-3
RTECS: YE6650000
TRIETHYLENE TETRAMINE POLYMER W/METHYL OXIRANE *92-3*
CAS: 26950-63-0
Hazards
LD50 LC50 Mixture:ORAL LD50 (RAT): 4500 MG/KG
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: IRRITATION. EYES: IRRITATION,
CORROSIVE, & BURNS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: CORROSIVE & BURNS. SKIN: CORROSIVE,
IRRITATION & DERMATITIS.
Medical Cond Aggravated by Exposure:SKIN & EYE CONDITIONS
First Aid
First Aid:EYES: IMMEDIATELY FLUSH W/WATER FOR AT LEAST 15 MINS. SKIN:
WASH W/SOAP & WATER. INGESTION: IF CONSCIOUS, GIVE PLENTY OF WATER
TO DRINK. DON'T INDUCE VOMITING. INHALATION: REMOVE TO FRESH AIR.
GIVE OX YGEN/ARTIFICIAL RESPIRATION IF NEEDED. OBTAIN MEDICAL
ATTENTION IN ALL CASES. REFERRAL TO PHYSICIAN IS RECOMMENDED IF
THERE IS ANY QUESTION ABOUT SERIOUSNESS OF ANY INJURY.
Fire Fighting
Flash Point Method:PMCC
Flash Point:>300F
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:COMBUSTION AND DECOMPOSITION PRODUCTS MAY
BE TOXIC.
Accidental Release
Spill Release Procedures:REMOVE SPILLAGE BY ABSORBING IN ABSORBENT
MATERIAL.
Handling
Handling and Storage Precautions:DON'T GET IN EYES. AVOID CONTACT
W/SKIN & CLOTHING. AVOID INHALING VAPOR OR MIST. USE W/ADEQUATE
VENTILATION. KEEP CONTAINER CLOSED.
Other Precautions:NUISANCE DUST MAY BE GENERATED WHEN SANDING OR SAWING
CURED MATERIAL.
Exposure Controls
Respiratory Protection:NIOSH APPROVED ORGANIC VAPOR CARTRIDGE
RESPIRATOR WHEN VAPOR/MIST EXPOSURE IS LIKELY.
Ventilation:GENERAL MECHANICAL/LOCAL EXHAUST: REQUIRED.
Protective Gloves:IMPERMEABLE
Eye Protection:SPLASH-PROOF CHEMICAL GOGGLES
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. REMOVE/LAUNDER
CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health
Chemical Properties
Vapor Pres:0.01
Spec Gravity:1.02-1.06
Solubility in Water:MODERATE
Appearance and Odor:LIGHT AMBER LIQUID, AMINE ODOR.
Percent Volatiles by Volume:NEGLI
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, ACIDS, METAL-ORGANIC COMPOUNDS
Stability Condition to Avoid:EXCESSIVE HEAT FOR PROLONGED PERIODS OF
TIME.
Hazardous Decomposition Products:TOXIC MATERIALS SUCH AS CO, CO2
Disposal
Waste Disposal Methods:DISPOSE IN ACCORDANCE TO FEDERAL, STATE AND
LOCAL HEALTH & ENVIRONMENTAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.